Recording Mode Setting - JVC GR-DV2000ED Instructions Manual

Power Switch
Power Lamp
Lock Button
MENU Wheel
Display
REC MODE – SP
LP

Recording Mode Setting

Set the tape recording mode depending on your preference.
1
2
3
4
NOTES:
Menu Screen
Sub Menu
Set the Power Switch to "
the Lock Button located on the switch, and open the
LCD monitor fully or pull out the viewfinder fully.
The power lamp lights and the camcorder is turned
on.
Press the MENU wheel. The Menu Screen appears.
Rotate the MENU wheel to select "
press it. The CAMERA Menu appears.
Rotate the MENU wheel to select "REC MODE" and
press it. The Sub Menu appears. Select "SP" or "LP"
by rotating the MENU wheel and press it. Rotate the
MENU wheel to select "1RETURN", and press it
twice. The Menu Screen closes.
•Audio Dubbing (
( pg. 72) are impossible on a tape recorded in the
LP mode.
•"LP" (Long Play) is more economical, providing
1.5 times the recording time.
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
EN
" while pressing down
CAMERA" and
pg. 71) and Insert Editing
15