Panasonic KIT-Z50-VKE Operating Instructions Manual page 22

How to use
Setting connection network
Ensure Wireless LAN LED is ON, point
1
the remote control to air conditioner and
press Wireless LAN
Wireless LAN LED changed to blinking.
Step 1 Step 1
Make sure smartphone is connected to same
wireless network.
When Wireless LAN LED is ON, tap "Next".
1. Point the remote control to air-
and press the "Wireless LAN" bu on once.
2. When Wireless LAN LED is blinking, tap "Next".
Wireless LAN Wireless
LAN bu on bu on
Select the preferred router support
3
connectivity mode.
Step 1
The router supports WPS.
Connect with WPS mode
The router does not supports WPS.
Connect with AP mode
22
button until the
Connection Guide
Step 2 Step 2 Step 3 Step 3
condi oner
Wireless LAN
SET
CANCEL
LED
Next
Cancel
Connection Guide
Step 2 Step 3
Cancel
When Wireless LAN LED is blinking,
2
select the preferred connection setup
mode.
Connection Guide
Step 1
Wireless LAN LED.
LED is OFF
LED is ON
LED is Blinking
Step 2 Step 3
.
Cancel