Date/Time Settings; Viewfinder Adjustment; Brightness Adjustment Of The Display; Tripod Mounting - JVC GR-D770UC Instructions Manual

Date/Time Settings

1
Select
2
SET
The date/time is recorded onto the tape at all
times, but its display can be turned on or off.
( pg. 32, 33)
Perform steps 1 – 3 in "Language Settings"
( pg. 14).
1
Select "DISPLAY", press SET or
2
Select "CLOCK ADJ.", press SET or
3
Select the desired date display format,
press SET or .
2
Repeat this step to input time display format
(Select from "24h" or "12h"), month, date, year,
hour and minutes.
4
Press MENU.
Press 1 whenever you want to return to the
previous menu screen/setting.
Viewfinder Adjustment
1
Set the Power Switch to "REC" while
pressing down the Lock Button located on the
switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully.
3
Turn the Diopter Adjustment Control until
the indications in the viewfinder are clearly
focused.
Example:
Diopter Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
CLOCK ADJ.
MONTH. DATE. YEAR 12h
JAN. 03. 2007
02 : 10 AM
.
2
.
2
GETTING STARTED
Brightness Adjustment Of The
Display
1
Select
2
SET
Perform steps 1 – 3 in "Language Settings"
( pg. 14).
To adjust the brightness of the viewfinder,
pull out the viewfinder fully and set
"PRIORITY" to "FINDER" (
1
Select "DISPLAY", press SET or
2
Select "BRIGHT", press SET or
3
Select the appropriate brightness, press
SET or .
2
4
Press MENU.
Press 1 whenever you want to return to the
previous menu screen.

Tripod Mounting

To attach the
camcorder to a tripod,
align the direction stud
and screw to the
mounting socket and
stud hole on the
camcorder. Then
tighten the screw
clockwise.
Some tripods are not
equipped with studs.
15
EN
±
0
BRIGHT
pg. 32).
.
2
.
2