Ozito PX3HITB-220 Instruction Manual
Ozito PX3HITB-220 Instruction Manual

Ozito PX3HITB-220 Instruction Manual

Compact hammer drill

Advertisement

Quick Links

COMPACT
HAMMER DRILL
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
Chuck Size:
13mm Keyless
No Load Speed:
0-350 / 0-1,250/min
Impact Rate:
0-5,250 / 0-18,750bpm
Torque Setting:
18
Max. Torque:
40Nm
Charge Time:
40mins (2.0Ah)
Weight:
1.1kg (Tool Only)
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WHAT'S IN THE BOX
Cordless Hammer Drill &
Impact Driver
Cordless LED Torch
Small Tool Bag
2 x 2.0Ah Batteries & Fast
Charger
PX3HITB-220
0617

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PX3HITB-220 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PX3HITB-220

  • Page 1 1.1kg (Tool Only) 2 x 2.0Ah Batteries & Fast ozito.com.au Charger PX3HITB-220 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    SETUP & PREPARATION KNOW YOUR PRODUCT COMPACT HAMMER DRILL 1. BATTERY & CHARGING (PXHDS-301) 1 Metal Ratcheting Chuck 6 Sure Grip Handle CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE 2 Torque Adjustment Collar 7 LED Light (RATED AT 30mA OR LESS).
  • Page 3: Battery Installation

    2. BATTERY INSTALLATION Installing the Battery Pack Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Slide the battery into the drill base until it clicks into place. 2 The charger LED will flash green showing power is being supplied to the charger.
  • Page 4: Operation

    OPERATION 3. KEYLESS CHUCK 4. CONTROLS Forward/ Reverse Lever WARNING! ENSURE THE TOOL IS SWITCHED OFF AND 1 For forward rotation, push the fwd/rev lever towards the left side of the drill. For DISCONNECTED FROM THE POWER SUPPLY BEFORE reverse rotation push fwd/rev lever to the right. PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 5 Note: Do not force the drill or apply side pressure to elongate the hole. Let Note: 2nd gear (high speed) is the drill do all the work. recommended for hammer drilling. PX3HITB-220...
  • Page 6: Maintenance

    A simple way of achieving a hole at a desired depth is to use masking tape. Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the drill by an unauthorised person or by mishandling.
  • Page 7: Spare Parts

    This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of visit www.ozito.com.au or contact Ozito Customer fire, electric shock or electrocution. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal Service: heat.
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.
  • Page 9: Warranty

    1.4kg 2 x 2.0Ah Batteries & Fast ozito.com.au Charger PX3HITB-220 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 10 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS IMPACT DRIVER (PXIDS-300) 1. ASSEMBLY 1 Drive Bit Retaining Ring 4 Belt Hook 2 Tri-Beam LED Light 5 Forward/ Reverse Lever WARNING! ENSURE THE TOOL IS SWITCHED OFF AND 3 Variable Speed Trigger THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 11 2. BATTERY & CHARGING Charging your lithium ion battery - Eco Charger CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 1 Connect the charger into a mains power outlet. BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS). 2 The charger LED will flash green showing power is being supplied Charging your lithium ion battery - Fast Charger...
  • Page 12: Driving Procedure

    6 Slowly increase pressure on trigger to appropriate torque for circumstances until screw or bolt is tightened. Note: Do not force the driver or apply side pressure to elongate the hole. Let the impact driver do the work. PXIDS-300 PX3HITB-220...
  • Page 13 Recycle battery Do not put in the rubbish Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the impact driver by an unauthorised person or by mishandling of the Do not incinerate Do not get battery wet impact driver.
  • Page 14: Impact Driver Safety Warnings

    The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
  • Page 15 0.2kg ozito.com.au 2 x 2.0Ah Batteries & Fast Charger PX3HITB-220 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 16 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS LED TORCH (PXTLS-905) 1. BATTERY & CHARGING 1 LED Light 4 Sure Grip Handle 2 Rotating Head 5 Battery Seating CAUTION: THE CHARGER FOR THIS PRODUCT 3 On/Off Switch 6 Hanging Hook SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30mA OR LESS).
  • Page 17: Fitting The Battery

    2. FITTING THE BATTERY Inserting & Removing the Battery Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Align the ribs of the battery with the recess at the base of the torch and 2 The charger LED will flash green push in until it clicks into place.
  • Page 18: Adjusting The Angle

    2 To aim the torch away from the ground, tilt the head backward. Using the hanging hook 1 To use the hanging hook at the rear of the torch, swivel metal hook to required position. PX3HITB-220...
  • Page 19 New Zealand 0508 069 486 E-mail: enquiries@ozito.com.au Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the torch by an unauthorised person or by mishandling of the torch. CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way.
  • Page 20: Battery And Charger Safety Warnings

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.

Table of Contents