Ozito Power X Change PXBDS-220 Instruction Manual

Ozito Power X Change PXBDS-220 Instruction Manual

Brushless drill driver

Advertisement

Quick Links

BRUSHLESS
DRILL DRIVER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
Chuck Size:
13mm Keyless
No Load Speed:
0-400 / 0-1,500/min
Torque Setting:
21
Max. Torque:
55Nm
Max. Drilling Ø:
32mm Wood
10mm Metal
Weight:
1.1kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WHAT'S IN THE BOX
Brushless Drill Driver
Battery & Charger
sold separately
PXBDS-220
0416

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power X Change PXBDS-220 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito Power X Change PXBDS-220

  • Page 1 10mm Metal Battery & Charger Weight: 1.1kg sold separately ozito.com.au PXBDS-220 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    Charger LED Indicator BATTERY & CHARGER (sold separately) LED Indicator Situation This tool is compatible with all battery and chargers from the Ozito GREEN (Flashing) Stand By (no battery pack is inserted) Power X Change Range. RED (Flashing) Battery is charging (low charge)
  • Page 3: Battery Installation

    2. BATTERY INSTALLATION Installing the Battery Pack Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Slide the battery into the drill base until it clicks into place. 2 The charger LED will flash green showing power is being supplied to the charger.
  • Page 4: Operation

    OPERATION 3. KEYLESS CHUCK 4. CONTROLS Forward/ Reverse Lever WARNING! ENSURE THE TOOL IS SWITCHED OFF AND 1 For forward rotation, push the fwd/rev lever towards the left side of the drill. For DISCONNECTED FROm THE POWER SUPPLY BEFORE reverse rotation push fwd/rev lever to the right. PERFORmING ANY OF THE FOLLOWING TASkS.
  • Page 5: Helpful Tips

    6. HELPFUL TIPS 5. DRILLING Before starting to drill, perform a few simple checks. Drilling to a Preset Depth 1 Depress and release the variable 2 Check the forward/reverse lever A simple way of achieving a hole at a desired depth is to use masking tape. speed trigger to ensure it is not is on desired setting.
  • Page 6: Maintenance

    Blow out the ventilation slots with compressed air periodically . reaches optimum charge and run time. Variable speed trigger is locked Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the drill by an unauthorised person or by mishandling.
  • Page 7: Spare Parts

    For further information, or any parts not listed here, using the battery pack. This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of visit www.ozito.com.au or contact Ozito Customer fire, electric shock or electrocution. Service: Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat.
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.
  • Page 9: Battery Safety Warnings

    Save these instructions and other documents supplied with this tool for future reference. DESCRIPTION OF SYMBOLS Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated therefore no earth wire is required.
  • Page 10 Australia 1800 069 486 tool) for the battery to reach its optimum performance / runtime. This battery is compatible with chargers from the 18V Ozito Power X Change range New Zealand 0508 069 486 available through your local Bunnings Warehouse: Product availability may differ.
  • Page 11 Save these instructions and other documents supplied with this tool for future reference. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. DESCRIPTION OF SYMBOLS This tools charger is double insulated therefore no earth wire is required.
  • Page 12: Charging A Battery

    1. CHARGING A BATTERY 2. MAINTENANCE This charger is compatible with batteries from the 18V Ozito Power X Change range • Disconnect the charger from power source before cleaning. available through your local Bunnings Warehouse: Product availability may differ. • Keep the charger in a dry place out of reach of children.

Table of Contents