Singer Quantum Stylist 9960 Service Manual page 31

F. Front Cover
To remove front cover the following covers needs to be re-
moved fi rst, The light cover, needle plate, base and thread
tension cover.
1. Remove the screw (a) located on the top right side of
a
the machine.
b
2. Loosen the screw (b) located on the top left side of the
machine.
3. Loosen the screw (c) located on the left side of the
machine.
c
4. Tilt the machine backward.
Hook your fi ngers to the edge of front cover (d) and
f
pull it upper side to come off the hook (e, f).
e
d
5. Push the left side of rear cover (g) and pull the front
g
cover toward you. (hook-h will come off).
h
6. Disconnect the 3 connectors (i, j, k) from the machine
i
and remove the front cover.
j
k
TM
Singer Quantum Stylist 9960 31