TP-Link TL-WA901ND Installation Manual page 12

Hide thumbs Also See for TL-WA901ND:

Appendix 1: With PoE Setup

1. Turn off all your network devices, including your computer(s), power injector and

the AP.

2. Connect your computer to the LAN port on the power injector with an Ethernet

Cable.

3. Connect your AP to the POE port on the power injector with an Ethernet Cable.

4. Plug the provided power adapter into the DC jack on the power injector, and the

other end to a standard electrical wall socket.

5. Then you can configure the AP according to 2 Configuring the device.

Note

1. Passive PoE Injector supports a maximum cable length up to 30 meters

due to the environment.

2. For longer powered cable up to 100 meters, please choose TP-LINK's 48V

PoE adapters: TL-POE200 or TL-POE150S & TL-POE10R.

Product information can be found on our official website: http://www.tp-link.com.