Download Print this page

KTC GZR18 Instruction Manual

NOTE: Grease Can is not included GZR18.

Wide Range of Applications

Fit for various size bearings used in automobiles (from mini-cars to large-sized Trucks) and

construction machinery.

Easy handing, improved work efficiency, keeps hands clean

Grease can be exchanged easily, no skill is required.

Reduced Grease consumption by elimination waste

Only a minimal amount of grease is required. Helps saving the Grease.

1. Install Inner Lid

Hold down the Inner Lid until grease comes

up from Center Hole.

GREASE EXCHENGER HIGHLOAD (GZR18)

Instruction Manual

Usage

Suitable for exchanging grease used in heavy-

loaded bearings of large-sized vehicle.

For exchanging grease in the hub bearings during

inspection and servicing of vehicles for general

use.

2. Install Pipe

Install Pipe into Center Hole.

Hold down the Upper Lid until it hit to edge

of Grease Can.

Use Thumbscrews and fix the Upper Lid.

Table of Contents

Do you have a question about the GZR18 and is the answer not in the manual?

Page 1 For exchanging grease in the hub bearings during inspection and servicing of vehicles for general use. NOTE: Grease Can is not included GZR18. Product Features Wide Range of Applications Fit for various size bearings used in automobiles (from mini-cars to large-sized Trucks) and construction machinery.
Page 2 Usage Method 1. Remove an Upper Cone 2. Install a Bearing Turn the Handle to Chucking position and pull up Setup a Bearing on the center of Lower Cone. and remove the Upper Cone. 3. Chucking 4. Retightening Insert an Upper Cone into Guide Shaft Hold a Detent Handle to fix the Bearing then turn a handle and chuck it.