Brother DCP-1510 Faq & Troubleshooting page 2

3.7.2018
5. Wipe the surface of the drum gently with a dry cotton swab until the dust of glue on the surface comes off.
6. Put the toner cartridge back into the drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit
will lift automatically.
7. Put the drum unit and toner cartridge assembly back into the machine.
8. Close the top cover. After pulling the pull-arm (1) on the left side of the machine down, close the scanner cover using both hands.
http://support.brother.com/g/b/faqend.aspx?c=au&lang=en&prod=dcp1510_eu_as&faqid=faq00002256_019
Clean the Drum Unit. | Brother
2/4