Table of Contents
Advertisement
3.6 Se tup submenu: Security
Change Administrator/User Password
Y ou can set an Administrator password. If you set an Administrator password , you can
then set a User password. User passwords do not have access to many of the features
in the Setup utility.
Select the password you want to set and press <Enter>. A dialog box will appear which
lets you set the password. Passwords must be between 3 and 20 letters or numbers.
Press <Enter> and re-enter the password into the next dialog box that appears. Press
<Enter> after you have retyped it correctly. The password is required at boot time, or
when the user enters the Setup utility.
R emove Password
Highlight this item and type in the current password. At the next dialog box press
<Enter> to disable password protection.
Chapter 3 – AMI BIOS Setup
48
Advertisement
Table of Contents
