Setup submenu: Security
Change Administrator/User Password
You can set an Administrator password. If you set an Administrator password, you can
then set a User password. User passwords do not have access to many of the features
in the Setup utility.
Select the password you want to set and press <Enter>. A dialog box will appear which
lets you set the password. Passwords must be between 3 and 20 letters or numbers.
Press <Enter> and re-enter the password into the next dialog box that appears. Press
<Enter> after you have retyped it correctly. The password is required at boot time, or
when the user enters the Setup utility.
Highlight this item and type in the current password. At the next dialog box press
<Enter> to disable password protection.
Chapter 3 – AMI BIOS Setup