Milwaukee M12 2550-20 Operator's Manual

Hide thumbs Also See for M12 2550-20:

OPERATOR'S MANUAL

Cat. No.

2550-20

M12™ RIVET TOOL

WARNING

To reduce the risk of injury, user must read and understand operator's manual.

Table of Contents

Need help?

Do you have a question about the M12 2550-20 and is the answer not in the manual?

Page 1 OPERATOR'S MANUAL Cat. No. 2550-20 M12™ RIVET TOOL WARNING To reduce the risk of injury, user must read and understand operator's manual.
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
Page 3: Specifications
• Always use mandrel box. Spent mandrels can be ejected from the tool, causing injury. • Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. • Some dust created by power sanding,...
Page 4: Operation
ASSEMBLY OPERATION Recharge only with the charger To reduce the risk of injury, always WARNING WARNING specified for the battery. For spe- wear safety goggles or glasses cific charging instructions, read the operator’s with side shields. manual supplied with your charger and battery. Always remove battery pack before changing or removing accessories.
Page 5: Maintenance
Never use flammable or combus- tible solvents around tools. Repairs For repairs, return the tool, battery pack and charger to the nearest service center. Rely on premium power tools by Milwaukee if you’re looking for quality and efficiency.