Advertisement
MAINTENANCE AND CARE
Please remember to never leave the microscope with any of the objectives or eyepieces removed and
always protect the microscope with the dust cover when not in use.
SERVICE
ACCU-SCOPE
®
microscopes are precision instruments which require periodic servicing to keep them
performing properly and to compensate for normal wear. A regular schedule of preventative
maintenance by qualified personnel is highly recommended. Your authorized ACCU-SCOPE distributor
can arrange for this service. Should unexpected problems be experienced with your instrument, proceed
as follows:
1. Contact the ACCU-SCOPE distributor from whom you purchased the microscope. Some
problems can be resolved simply over the telephone.
2. If it is determined that the microscope should be returned to your ACCU-SCOPE distributor or to
ACCU-SCOPE for warranty repair, pack the instrument in its original Styrofoam shipping carton.
If you no longer have this carton, pack the microscope in a crush-resistant carton with a minimum
of three inches of a shock absorbing material surrounding it to prevent in-transit damage. The
microscope should be wrapped in a plastic bag to prevent Styrofoam dust from damaging the
microscope. Always ship the microscope in an upright position; NEVER SHIP A MICROSCOPE
ON ITS SIDE. The microscope or component should be shipped prepaid and insured.
3.
This microscope stand and its electronic components are warranted to be free from defects in material and workmanship for
a period of five years from the date of invoice to the original (end user) purchaser. The LED lamp is warranted for a period of
one year from the date of invoice to the original (end user) purchaser. This warranty does not cover damage caused in-
transit, misuse, neglect, abuse, or damage resulting from improper servicing or modification by other than ACCU-SCOPE
approved service personnel. This warranty does not cover any routine maintenance work or any other work, which is
reasonably expected to be performed by the purchaser. Normal wear is excluded from this warranty. No responsibility is
assumed for unsatisfactory operating performance due to environmental conditions such as humidity, dust, corrosive
chemicals, deposition of oil or other foreign matter, spillage, or other conditions beyond the control of ACCU-SCOPE INC. This
warranty expressly excludes any liability by ACCU-SCOPE INC. for consequential loss or damage on any grounds, such as (but
not limited to) the non-availability to the End User of the product(s) under warranty or the need to repair work processes.
Should any defect in material, workmanship or electronic component occur under this warranty contact your ACCU-SCOPE
distributor or ACCUSCOPE at (631) 864-1000. This warranty is limited to the continental United States of America. All items
returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE INC.,
11725
– USA. All warranty repairs will be returned freight prepaid to any destination within the continental United States of
America, for all foreign warranty repairs return freight charges are the responsibility of the individual/company who returned
the merchandise for repair.
ACCU-SCOPE is a registered trademark of ACCU-SCOPE INC., Commack, NY 11725
ACCU-SCOPE
®
LIMITED MICROSCOPE WARRANTY
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
DS-360 Diascopic Stand
73 Mall Drive, Commack, NY
9
Advertisement
