Advertisement
ASSEMBLY
ACCU-SCOPE
®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
DS-360 Diascopic Stand
NOTE: Allow your stereo microscope and stand to
come to room temperature before use. Cold
components may result in internal condensation
and potential failure of electrical components.
1. Carefully remove the contents of the box and
place on a secure, flat surface.
2. Place the DS-360 stand on a flat surface
Included:
DS-360 stand with attached focus track and
microscope mount, plastic arm rest, 180mm glass
stage plate, LED light, power adapter/controller,
AC line cord.
3.
Place the glass stage plate into position on the
base.
4.
Align the slots in the arm rest to the silver
"buttons" on the base and slide the arm rest
down over the buttons until the top of the arm
rest is flush with the working surface of the
base.
4
Advertisement
