Satellite Radio Operations - Clarion DXZ275MP Owner's Manual

Cd/mp3/wma receiver with cenet control
Table of Contents

Advertisement

Satellite Radio Operations

This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Radio Receiver: XMD1000
• XM Smart Digital Adapter: XM SDA
• SIRIUS Satellite Radio Receiver: SIRCL2,
SIRCL3
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by the
following notations:
"XM": for an XM Satellite Radio Receiver
"SIRIUS": for a SIRIUS Satellite Radio Receiver
Selecting a Satellite Radio mode
1. Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [BND] button to select a band.
This changes the reception band as follows:
• XM: XM1
XM2
• SIRIUS: SR1
SR2
Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: "UPDATING"
• When a channel is being tuned in (no signal is
yet received):
XM: "LOADING", SIRIUS: "LINKING"
• A channel without a broadcast has been
selected:
XM: "– – – CH", SIRIUS: "INVLD CH"
• A channel not covered by your contract:
XM: "UPDATING", SIRIUS: "CALL 888"
"539-SIRI" (alternated)
24
DXZ275MP/DXZ375MP
XM3
XM1 ...
SR3
SR1 ...
Confirming your SIRIUS ID
1. Press and hold the [D] button for 1 second or
longer to display the ADJUST item.
2. Press the [x] or [v] button to select "SID
DISP".
3. Press the [
] button, the display will
display the upper 6 digits.
4. Press the [w] or [z] button to switch
between the display for the upper 6 digits
and lower 6 digits.
5. To return to the previous mode, press the [D]
button.
Displaying channel labels
1. Press the [D] button to select the desired
channel label.
Channel
Category
Radio text
Channel...
Channel selection
1. Channels are selected with the [x] or
[v] button.
For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
Quick tuning
1. Press and hold the [x] or [v] button for
1 second or longer.
Step tuning
1. Press the [x] or [v] button.
Recalling a preset station
A total of 18 satellite radio stations can be
stored.
• XM: 6-XM1, 6-XM2 and 6-XM3
• SIRIUS: 6-SR1, 6-SR2 and 6-SR3
This allows you to store your favorite satellite
radio stations in memory for later recall.
1. Press the [BND] button to select the desired
band.
2. Press the [w] / [z] button or [DIRECT]
button to select the desired preset station.
Title
Artist

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxz375mp

Table of Contents