Honda TRX400X Owner's Manual page 151

4. Check the drive chain slider ( ) at the intervals specified in the Main-
tenance Schedule.
The chain slider must be replaced if it is worn to the wear limit line
( ). For replacement, see your Honda dealer. 3
LEFT SIDE
(2) drive chain slider
5. With the upper or lower section of drive chain tight between the
sprockets measure the distance between a span of
center to pin center. If the distance exceeds the service limit, the chain
is worn out and should be replaced.
Service limit:
12.56 in (319.1 mm)
2
(3)
measure a span of 21 pins
Drive Chain
(2)
(3) wear limit line
21 pins from pin
Servicing Your Honda
(cont'd)
143