Haier 1U35S2SM1FA-2 Service Manual page 43

10.3.10 The communication fault between indoor and outdoor
■ ■ ★/ E7
Indoor display
outdoor display LED1 flash 15 times
Method of Communication is detected by checking the indoor PCB and the outdoor PCB.
Malfunction
Detection
Malfunction
Decision The indoor PCB broken leads to communication fault.
Conditions
Supposed
Causes
Troubleshooting * Caution Be sure to turn off power switch before connect or disconnect connector, or else
The outdoor PCB broken leads to communication fault.
Communication wiring disconnected.
The indoor PCB is broken.
The outdoor PCB is broken.
The Module PCB is broken.
parts damage may be occurred.
43 Domestic air conditioner
Service diagnosis