Cd/Mp3 Mode Operations - Clarion DB538RMP Owner's Manual

CD/MP3 Mode Operations

Loading a CD
Insert a CD into the center of the CD insertion slot
with the labeled side facing up. "LOAD" appears in the
display, the CD enters into the slot and start playing.
Notes:
• Do not put your hand, fingers, or foreign objects
into the CD insertion slot.
• If a CD has already been loaded, another CD
cannot be inserted. Do not insert another one
forcefully.
• Discs not bearing the
played with the unit. CD-ROMs cannot be played.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Caution:
• Single CD (3"(8 cm)), cannot be played with the
unit.
Listening to the Disc already Inserted
Press the [FNC] button to select the CD mode,
the CD will start playing.
Stopping (pausing) Playback
While the CD playing pressing the [s] button
will stop the CD and "PAUSE" indicate.
Press the [s] button again to resume play-
back.
Ejecting the CD
Press the [Q] button, then the CD will be
ejected.
Note:
• If the ejected CD is left as it is, it will be reloaded
after 15 seconds.
Top Function
Press the [BND] button, then the CD will start
playing from the first song (track number 1).
18
DB538RMP
mark cannot be
Selecting Tracks (songs)
Press the [a][d] button.
d: Playback will start from the next track.
a: Playback will start from the beginning of
the track currently playing. When this
button is pressed again, the CD will play
from the previous track.
Fast-Forward and Fast-Backward
Press and hold the [a][d] button.
d: To fast-forward
a: To fast-backward
∗ Pressing the [a][d] button for 1 second or
longer will move forward or backward 3 times
faster than normal play, and pressing it for 3
seconds or longer will do the operation 30 times
faster.
Scan Play (Intro Music Scan)
At Audio CD press the [SCN] button, then the
display shows "SCN", then the CD will play the
first 10 seconds of each track of the whole disc.
Press the [SCN] button again to disengage the
unit from scan play.
∗ A scan play will start from the track following the
one currently playing.
Repeat Play
At Audio CD press the [RPT] button, then the
display shows "RPT", then the track currently
playing will be played repeatedly. Press the
[RPT] button again to disengage the unit from
repeat play.
Random Play
At Audio CD press the [RDM] button, then the
display will show "RDM", then the entire tracks
on the disc will be played at random. Press the
[RDM] button again to disengage the unit from
random play.