Adjusting The Balance - Clarion DB538RMP Owner's Manual

Basic Operations
Adjusting the bass
1. Press the [A-M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ The factory default setting is "0". (Adjustment
range: –7 to +7)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble
1. Press the [A-M] button and select "TREB".
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗ The factory default setting is "0". (Adjustment
range: –7 to +7)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.

Adjusting the balance

1. Press the [A-M] button and select "BAL".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is "0". (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select "FAD".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗ The factory default setting is "0". (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Note:
• Bass and Treble can only be adjusted when the
"Z-enhancer" is off.
12
DB538RMP
Turning on/off MAGNA BASS EX
To adjust the MAGNA BASS EX
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
∗ The factory default setting is off. Press and hold
the [A-M] button for 1 second or longer to turn the
MAGNA BASS EX and "M-B EX" in the display
lights on or off.
CT (Clock Time) function
The CT function enables you to display clock
time only when CT data is received.
Press and hold the [BND] button, and then
press the [DISP] button, the display switches to
CT (Clock Time).
∗ When no CT data is received, "CT––:––" appears
in the display.
Note:
• There are some countries and stations where
clock time data are not transmitted. In some ar-
eas, the CT may not be displayed correctly.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗ This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
∗ The factory default setting is "TEL OFF".
Press and hold the [BND] button, and then
press the [s] to select the "TEL ON", "TEL L",
"TEL R" or "TEL OFF".
TEL MUTE: mutes the audio sound.
TEL L: front left speaker output telephone audio.
TEL R: front right speaker output telephone audio.
TEL OFF: does not mute the audio sound.
TEL MUTE TEL L
Illumination dimmer function
When the illumination line of this unit is con-
nected with the car-side illumination signal line,
the display illumination of this unit dims in con-
nection with turning on the car-side illumination.
TEL R TEL OFF