Dimplex CFS30E Instruction Manual page 32

PIN Lock
This locking method utilises a PIN code that is set by the User. When activated, the
appliance is locked in the previously active mode and user will be restricted to basic
functions. In order to change the mode or settings the PIN code must be re-entered.
It is important that all required parameters such as time profi les and/or temperatures
are set and the desired mode is activated before applying the PIN lock.
The following table summarises the product function after PIN lock has been applied
Active mode
Timer mode
Comfort On
Frost protect
Comfort Off
To activate PIN Lock:
• First ensure the appliance is in the desired mode of operation, continuous heat
or user timer, ensure the desired temperature or time profi les are set and any
desired advanced modes are enabled.
• Hold ADV and MENU buttons for 2 seconds
• Use the arrow keys to highlight the Pin Lock symbol and confi rm using the
ENTER key.
• Use the arrow keys to select the fi rst digit. Press ENTER to set the next digit.
Repeat until all four digits have been set. Press ENTER to return to the Home
screen with the device PIN locked.
32
Function after PIN lock is applied
All functionality will be disabled, the appliance will continue to follow the
pre-set time and temperature profi les. Advance function is not available
All functionality will be disabled, the appliance will continue to control to
the pre-set comfort on temperature. Runback mode is not available
All functionality will be disabled, the appliance will continue to provide
frost protection. Runback mode is not available
All functionality will be disabled, the appliance will remain in Comfort off
mode with no heat or temperature control. Runback mode (if active) can
be initiated using the ADV key.