Dimplex CFS30E Instruction Manual page 26

Advanced Mode Functions
These functions modify the normal behaviour of the appliances operational modes. The
advanced functions available will depend on the active operation mode, for example
an advance function is only available when timer mode is operational and similarly a
runback function is only available for continuous heating modes.
The 'Advance' Function
The ADV button forces the next timer segment to activate early, this forces a temporary
change and will not aff ect the timer schedule. This allows the user the fl exibility to
begin or end a programmed heating period early, with the touch of a button.
This is useful if you are at home when you had not planned to be, or need to leave
when you had planned to have the heating on.
If the remote displays OFF, Schedule Icon or no target temperature, and heat is required,
press the ADV button. If the remote displays ON and heat is not required, press the
ADV button and the heater will stop heating until the beginning of the next ON period.
Pre-action State
Heating On (Timer Mode)
Heating Off (Timer Mode)
Heating On (Advance Active)
Heating Off (Advance Active)
26
Action
Advance activated
Advance activated
Advance deactivated
Advance deactivated
Impact
Heating On period switched to Heating
Off until the next scheduled 'Comfort On'
period.
Heating Off switched to Heating On until
the next scheduled 'Heating Off ' period.
Heating On switches to Heating Off .
Appliance will follow schedule set in the
currently active Timer Profi le
Heating Off Switches to Heating On.
Appliance will follow schedule set in the
currently active Timer Profi le