Beko VRR 70214 VB User Manual page 24

6 Cleaning and maintenance
2. Replace the brush after cleaning it and close the cover in the direction of the arrow.
6.3 Cleaning and installation of the side brush
In the long term use, wash the side brush with warm water in order to eliminate the shape deformation.
Install it to the robot as it is shown after it has dried.
6.4 Cleaning of the sensors
Clean the sensors and charging pins/electrodes regularly and remove the dust using a dry and soft cloth
or a cleaning brush.
Information: You get a notification via the application when sensor cleaning is required.
Şarj pinleri
Wheel shaft
Tekerlek mili
24 / EN
Robot Vacuum / User Manual