•
AV IN port(s) may not be available in some models. Please use other port(s) to connect AV devices.
Connect with a HDMI cable
To connect an AV device with a HDMI cable (not provided), see the illustration below.
When the connection is completed, using your remote, select the
the corresponding HDMI input.
Note:
•
Please refer to the User Manual of your device for step-by-step instructions.
•
Some devices, such as DVD players, require the HDMI signal to be set to the correct format in the device
settings. Please consult your device user manual for instructions.
•
If there is no sound from your TV, configure the device audio settings.
Related information
Use HDMI-CEC
on page 21
Connecting Speakers or Other Audio Receivers
To connect speakers or other audio receivers with an audio cable (not provided), see the illustration below.
Ensure the audio connected devices are switched on before switching on the TV.
When the connection is completed, go to
Output, and select the SPDIF option.
When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the TV volume, and use
your digital audio system to control the volume.
Note:
•
If you prefer to use Audio Return Channel/Enhanced Audio Return Channel, please refer to
External Devices > Connecting a Digital Audio System with ARC
You can connect the DIGITAL AUDIO OUT port on the back of the TV to the optical port on the amplifier.
•
Then go to
>
Auto - Dolby Digital to receive the Dolby Digital audio.
Connecting to External Devices
>
Settings > Sound > Audio Output Settings > Digital Audio Out to select Dolby
Input icon on Home screen, and select
Settings > Sound > Audio Output Settings > Audio
in this manual.
28
Connecting to