Network - Hisense A6 Series User Manual

Note:
•
This function is only applicable when
Output is set to ARC or SPDIF.
• When external audio devices are connected to the TV via optical, PCM and Dolby Audio - Dolby Digital
are recommended.
Digital Audio Delay
Adjust the digital audio output delay time to sync audio from an external speaker with the images on the TV.
This function is only applicable when
is set to ARC or SPDIF.
Lip Sync
Synchronise the video and audio.
This function may not be applicable in some Audio Output modes.
Balance
Adjust the left and right speaker level to optimise audio for a specific location.
This function may not be applicable in some Audio Output modes.
This function is not applicable when Dolby Atmos is turned on.
Related information
Connecting Speakers or Other Audio Receivers
Connecting a Digital Audio System with ARC
Headphone Settings Setup
> Settings > Sound > Headphone
Set the sound output mode through headphones.
After connecting your wired or Bluetooth headphone, or other external audio amplifiers, you can set up your
TV to your preference.
Note:
• This function may not be applicable in some models/countries/regions.

Network

You can get access to the Internet through your TV.
Check the Internet Connection Status
> Settings > Network > Internet Connection
Test the current network connection status and view the current network information.
Connection Test
> Settings > Network > Internet Connection > Connection Test
Settings Overview
> Settings > Sound > Audio Output Settings > Audio
> Settings > Sound > Audio Output Settings > Audio Output
on page 28
on page 29
37