ClearClick QUICKCONVERT 2.0 Users Manual & Quick Start Manual page 16

How To Clean The Scanner For Film Scanning
Use the supplied brush to clean the backlight panel:
turn off and disconnect the QuickConvert® 2.0, insert
the brush in the slot where you would normally insert
the film holders, and brush gently.
How To Adjust Brightness & Color
In scanning mode, you can adjust the scanner's
brightness & color before you scan the images.
To adjust the brightness and color of the image
before scanning, press the RGB (right ⮞) button once
on the scanner.
Use the left and right arrows to adjust the brightness
of the image.
To move to the red/green/blue settings, press the
Play button. Then, use the right and left arrow keys
to adjust the setting.
To save the settings, press the "OK" button.
16