Section 3: Verify Adaptation Of The Key And Remote To Vehicle Immobilizer - Audi Q3 2015 - 2019 Technical Service Bulletin

Figure 9. Deactivate the Basic Settings for "Key position, positioning".

Section 3: Verify Adaptation Of The Key And Remote To Vehicle Immobilizer

1. Access the basic settings menu of address word 0009 Central Electrics:
 In the Control modules view of GFF, right click control module 0009 "Central Electrics" to access this
modules options (Figure 10A).
 In the options menu, click "Guided Functions", to access the Guided Functions menu (Figure 10B).
 Highlight the "...Read MVB" option of the Guided Functions menu, then click "Perform" (Figure 10C).
© 2018 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 8 of 12