Table of Contents
Advertisement
Figure 2. The correct way to hold the
key while adapting it.
Note:
It is also important to ensure that all other keys are outside of the range of the Audi advanced key antennas
while programming a key.
Section 2: Verify Adaptation Of The Audi Advanced Key Transponder
1. Access the basic settings menu of address word 0005 Kessy:
In the Control modules view of GFF, right click control on module 0005 "Kessy" to access this modules
options (Figure 4A).
In the options menu, Click "Control module OBD", to access the OBD functions menu (Figure 4B).
Highlight the "Basic Settings" option of the OBD functions menu, then click "Perform" (Figure 4C).
© 2018 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Figure 3. The incorrect way to hold the key while adapting it.
Page 3 of 12
Advertisement
Table of Contents
