Connecting to the PC Using EMUBOOST
3
Connecting to the PC Using EMUBOOST
3.1
CC31XXEMUBOOST
3.1.1
Overview
The CC31XXEMUBOOST is designed to connect the CC3100 module BoosterPack board to a PC using a
USB connection. This updates the firmware patches, which are stored in the serial flash, on the
BoosterPack; and in software development using SimpleLink Studio.
3.1.2
Hardware Details
14
CC3100MOD SimpleLink™ Wi-Fi® Network Processor Module BoosterPackSWRU396A – December 2014 – Revised September 2015
Hardware
Figure 13. CC31XXEMUBOOST Board
Copyright © 2014–2015, Texas Instruments Incorporated
www.ti.com
Submit Documentation Feedback
Need help?
Do you have a question about the CC3100MODBOOST and is the answer not in the manual?