Table of Contents
Advertisement
Auto installation setup
Power On / Off the TV
Press the power button on the LED TV or the
indicator will light green.
To turn off the LED TV
Press the power button on the LED TV or the
indicator will light red.
When you initially turn on the TV you will see the first time installation menu as below:
Ensure that the aerial is plugged into the TV,
Make sure your Remote is in TV mode (by
pressing
button), switch on the TV by
TV
pressing
. You will see the first time
installation menu.
Press the
button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.
By pressing the Quick Start button the first
time installation can be recalled at any time.
Source Menu
You can select the input source menu by pressing the Source button on the remote control or
the TV / AV button on the TV.
Source
OK
button on the remote control, the standby
button on the remote control, the standby
19
DTV
ATV
SCART
YPBPR
PC
HDMI1
HDMI2
AV
USB
Advertisement
Table of Contents
