Auto Installation Setup; Source Menu - Cello C39114DVB-LCD User Manual

Auto installation setup

Power On / Off the TV
Press the STANDBY button on the L CD TV or the
indicator will light green.
To turn off the LCD TV
Press the STANDBY button on the L CD TV or the
indicator will light red.
When you initially turn on the TV you will see the first time installation menu as below:
Ensure that the aerial is plugged into the TV,
Make sure your Remote is in TV mode (by
pressing button), switch on the TV by
TV
pressing . You will see the first time
installation menu.
Press the button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.
By pressing the Quick Start button the first
time installation can be recalled at any time.
Press the OK button to select your Target region settings.
If you have more than one broadcasting signal in your area, select
the area signal of your choice using the
with OK.

Source Menu

You can select the input source menu by pressing the Source button on the remote control or
the SOURCE button on the TV.
Source
OK
button on the remote control, the standby
button on the remote control, the standby
buttons and confirming
19
DTV
ATV
SCART
YPBPR
PC
HDMI1
HDMI2
HDMI3
AV
USB