Common Interface Slot; Using Your Common Interface Slot; Auto Installation Setup; Power On / Off The Led Tv - Cello C4211ODVB-LED User Manual

Common Interface Slot

USING YOUR COMMON INTERFACE SLOT

Common Interface
The Common Interface (CI) slot is designed to accept
the Conditional Access Module (CAM) and Smart Card
in order to view the pay TV programmes and additional
services. Contact your Pay Per View TV service provider
to get more information about the modules and subscrip-
tions.
NOTE: Conditional Access Module and Smart Cards are
sold separately.
WARNING! SWITCH OFF YOUR TV BEFORE ANY MODULE
IS INSERTED INTO THE COMMON INTERFACE SLOT,
THEN ADD THE SMART CARD TO THE CAM.
CI Slot
CAM
1. Turn on the TV and ensure 'DTV' Source is selected.
2. If the CAM is detected the TV will display the following
message on the screen. "Common Interface Module
inserted" wait for a few moments until the card is
activated.
3. Select the relevant digital Pay Per View channel.
4. Detailed information on the Smart Card in use is dis-
played
5. Press the Ok button to access the card menu. Refer to
the Module Instruction Manual for setting details.
6. When the module is removed, the following message
will appear on the screen. "Common Interface module
removed".
Smart Card

Auto installation setup

Power On / Off the LED TV

To turn on the LED TV
Connect the mains lead to the AC power supply and connect the
aerial cable to the TV input socket. Make sure the power switch
on the right hand side of the TV is set to ON. The standby indicator
will be red.
Press the standby button on the TV or the
control, the standby indicator will turn green.
To turn off the LED TV
Press the standby button on the LED TV or the
remote control, the standby indicator will light red.
When you initially turn on the LED TV you will see the first
time installation menu as below:
Ensure that the aerial is plugged into the TV,
Make sure your Remote is in TV mode (by
pressing button), switch on the TV by
TV
pressing . You will see the first time
installation menu.
Press the button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.
By pressing the Quick Start button the first
time installation can be recalled at any time.
button on the remote
button on the
13