Related Manuals for Illuminator WL-13000T
Summary of Contents for Illuminator WL-13000T
- Page 1 42575 13,000-LUMEN WL-13000T LED WORK LIGHT OPERATOR’S MANUAL CAUTION: To reduce the risk of injury, user must read and understand this operator’s manual. Save these instructions for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS GENERAL SAFETY INFORMATION ..............3-4 WORK AREA SAFETY ...................3 ELECTRICAL SAFETY................3-4 PERSONAL SAFETY ..................4 POWER TOOL USE AND CARE .................4 SERVICE ......................5 IMPORTANT SAFETY INSTRUCTIONS ..............5 SPECIFICATIONS ....................6 PARTS LIST ......................6 ASSEMBLY ....................... 7-8 OPERATION ......................9 WARRANTY ......................9 NOTES ...................... -
Page 4: Personal Safety
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating a power tool. -
Page 5: Service
SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. -
Page 6: Specifications
SPECIFICATIONS VOLTAGE/FREQUENCY 120VAC/60Hz POWER 120 Watts (60 Watts x 2) BRIGHTNESS 13,000 Lumens (Total) 6,500K Cool White COLOR TEMPERATURE PARTS LIST DESCRIPTION QTY. DESCRIPTION QTY. Carrying Handle Power Cord Work Light Head Side Locking Knob Lens Stand On/Off Switch Tripod Six-Point Locking Knob FIG. -
Page 7: Assembly
ASSEMBLY FIG. 2A FIG. 2B ADJUSTING THE TRIPOD (FIG. 2A) Loosen the tripod locking knob (C). Push down the leg connector (A) until the legs (B) are fully extended. Firmly tighten the tripod locking knob (C). Adjust the height of the tripod by loosening the twist collars (D) and raising the center poles (E) of tripod. - Page 8 FIG. 3 ATTACHING POWER CABLE TO CARRYING HANDLE (FIG. 3) Use the handle locking knob (13) to attach the power cable connector (14) to the carrying handle (1) as shown in Fig. 3. FIG. 4 ATTACHING STAND TO TRIPOD (FIG. 4) Before attaching the stand to tripod, be sure to grasp handle to secure the stand in place.
-
Page 9: Operation
OPERATION ADJUSTING THE LIGHT DIRECTION The light head can be tilted vertically up to 30° down or 90° up. To adjust the light direction, loosen the side locking knob (6). Adjust the light head to the desired position, and re-tighten the knob. -
Page 10: Notes
NOTES... - Page 11 NOTES...
- Page 12 HIGH VISIBILITY LIGHTING. SEE THE DIFFERENCE. JS Products 6445 Montessouri Street Las Vegas, NV 89113 Customer Service: 855-212-5713 Fax: 775-898-8773 WWW.ILLUMINATORLIGHTING.COM 07.28.2021...