Related Manuals for Illuminator 41915
Summary of Contents for Illuminator 41915
- Page 1 1,000-LUMEN LED WORKLIGHT 41915 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
-
Page 2: Table Of Contents
TABLE OF CONTENTS General Safety Information..............................Page 1 Work Area Safety................................Page 1 Electrical Safety................................. Page 1 Personal Safety.................................. Page 1 Power Tool Use and Care..............................Page 2 Service....................................Page 2 Important Safety Instructions............................. Page 2 Specifications..................................Page 3 Parts List.................................... Page 3 Operation................................... -
Page 3: Power Tool Use And Care
PERSONAL SAFETY c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. -
Page 4: Specifications
IMPORTANT SAFETY INSTRUCTIONS • Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for wet location work light. Receptacles are available having the built-in GFCI protection and are able to be used for this measure of safety. •... -
Page 5: Operation
OPERATION ADJUSTING THE LIGHT DIRECTION The light head can be tilted vertically up to 30° down or 90° up. To adjust the light direction, loosen the side locking knob (Part 6). Adjust the light head to the desired position, and retighten the knob. ON/OFF SWITCH The light head is equipped with an ON/OFF switch (Part 4) located on the back side of the light.