Table of Contents
Advertisement
en Troubleshooting
Fault
E:3200 or indicator for wa-
ter supply lights up.
E:3400 lights up.
E:6102 lights up.
E:6103 lights up. Water is
not drained.
46
Cause
Water is continuously run-
ning into the appliance.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Troubleshooting
Turn off the water tap.
3.
Unscrew the water connection.
4.
Remove the filter from the supply
5.
hose
Clean the filter.
6.
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 59.
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 58
Secure the cover of the "Wastewa-
▶
ter pump " → Page 58 so it clicks
into position.
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the "Wastewa-
▶
ter pump " → Page 58 so it clicks
into position.
Advertisement
Table of Contents
