Troubleshooting - Faber FVC-WD POWERVC 825 Operating Instructions Manual

Wet & dry vacuum cleaner
Table of Contents

Advertisement

TROUBLESHOOTING

WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE
TROUBLESHOOTING
Symptom
Vacuum will not operate
Dust comes out from motor
cover.
Reduced efficiency and
motor/speed vibration.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this product
for environmental safe recycling.
Possible Causes
1) No power supply.
2) Faulty power cord.
3) Container full.
1) The cartridge filter or collection
bag is missing or damaged.
1) There is a blockage in the nozzle
or hose, or the container inlet. Or
dust filter blocked by fine dust.
Corrective Action
1) Check power supply –cord,
breakers, fuses.
2) Unplug and check the power cord.
If damaged,have it repaired by a
professional.
3) Empty container.
1) Attach or replace cartridge filter or
collection bag.
1) Check nozzle, hose and
container inlets for blockage. Take
off the filter and clean it. Or install
new cartridge filter.

Advertisement

Table of Contents
loading

Table of Contents