Specifications - Sony UP-X898MD User Manual

Hybrid graphic printer
Hide thumbs Also See for UP-X898MD:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16

Specifications

Power Requirements
100 V to 240 V AC, 50/60 Hz
Input Current
1.3 A to 0.6 A
Operating Temperature
5 °C to 40 °C (41 °F to 104 °F)
Operating Humidity
20% to 80% (no condensation allowed)
Operating Pressure
700 hPa to 1,060 hPa
Storage and Transport Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and Transport Humidity
20% to 80% (no condensation allowed)
Storage and Transport Pressure
700 hPa to 1,060 hPa
154 × 88 × 240 mm (w/h/d)
Dimensions
(6 1/8 × 3 1/2 × 9 1/2 inches)
Mass
2.5 kg (5 lb 8.2 oz) (printer only)
Thermal head
Thin-film thermal head, 1280 dots
Gradation
256-level gradation (8-bit)
Resolution (when "SC:WD1" is selected from "-SCAN"
of "VIDEO")
NTSC: 720 × 504 dots
PAL: 720 × 604 dots
Picture size
(when "SC:WD1" or "SC:NOR" is selected from
"-SCAN" of "VIDEO")
When "SIDE:OFF" is selected from
"-SIDE" of "VIDEO"
NTSC: 94 × 73 mm
PAL: 94 × 71 mm
When "SIDE:ON" is selected from
"-SIDE" of "VIDEO"
NTSC: 124 × 96 mm
PAL: 127 × 96 mm
(when "DIGITAL" is selected)
Max. 320 × 100 mm
Printing speed About 1.9 sec./image (at standard
setting) (when "HI" is selected from
"-SPEED" of "CONFIG.")
About 3.3 sec./image (at standard
setting) (when "NOR" is selected
from "-SPEED" of "CONFIG.")
Picture memory For Video
10 frames
(800k × 8 bits for one frame)
For Digital
Max. 4096 × 1280 dots
Dot density
H: 100 mm/1280 dots = 0.078
V: 100 mm/1280 dots = 0.078
Square dots
Input connector VIDEO IN (BNC type)
NTSC or PAL composite video signals
1.0 Vp-p, 75 ohms (NTSC/PAL
automatically discriminated)
Output connector
VIDEO OUT (BNC type)
Loop-through output from VIDEO IN
(Automatic termination)
Interface
Hi-Speed USB (USB 2.0)
USB connector (type A): USB flash
drive only
USB connector (type B)
REMOTE connector (stereo mini jack)
1 GND
2 PRINT SIGNAL (TTL)
Input of LOW pulse over 100 msec.
initiates print.
3 PRINT BUSY (TTL)
Goes HIGH during printing
Accessories provided
Thermal head cleaning sheet (1)
CD-ROM (including multi-lingual
Instructions for Use, Readme and
printer driver) (1)
Before Using this Printer (1)
Service Contact List (1)
USB flash drive ex cable 1-848-418-11
(Sony) (1)
Thermal Print Media UPP-110HG (1)
Information for Customers in Europe
(1)
Optional accessories
Thermal Print Media
UPP-110HG (High Glossy)
UPP-110HD (High Density)
UPP-110S (High Quality)
Remote commander RM-91
Foot switch FS-24
Wireless Print System UPA-WU10
1) As of December 2016, this accessory can be usable in the countries
of EU or EFTA, United States, Canada, and Japan.
1)
11
GB
Specifications

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents