Auto Update All; Select And Update; Pairing Your Imx8 Multiplexer - Gamry Instruments IMX8 Operator's Manual

Installation
If the firmware is compatible with software version, the Device Info area appears as:

Auto Update All

If no updates are required to use the instrument, this tool is grayed out. When your firmware revision is
incompatible, the Auto Update All button is active. This tool automatically selects the compatible firmware and
installs it. Gamry Instruments recommends that you use this button. To use this tool, take the following steps:
Caution:
Do not power off or disconnect the instrument during this process. Doing so
can cause irreversible damage to the instrument.
Click the Auto Update All button. A window appears giving information on what version of firmware is
currently installed, and what version will be installed. The install process starts automatically. After the relevant
firmware is updated, a window appears confirming the process is complete and successful. Click the OK
button. The instrument is now ready to be used.

Select And Update

The Select And Update button is available at all times, even if an update is not required. Gamry recommends
not altering the firmware if it is not necessary. This tool allows you to change individual firmware.
Please contact Gamry Tech Support if you are unsure if firmware modification is required.

Pairing your IMX8 Multiplexer

Pairing your Multiplexer with one of your potentiostats is simple. Two different methods within the Framework
software can be used.
26