Page 2
Hardware Installation and Con�guration Install your Gamry Instruments potentiostat Install your Gamry Instruments potentiostat and calibrate the instrument. Please refer to the potentiostat Operator’s Manual for detailed information. The latest version of the manual can be downloaded on the Gamry Instruments website at https://www.gamry.com/support/documentation-downloads/.
Page 3
Your IMX8 Multiplexer is supplied with a standard High Speed USB A/B cable. Connect the nearly square connector to the USB connector on the rear side of your IMX8. The other end, a wider, rectangular connector plugs into a USB port on your computer.
Page 4
Gamry Framework software offers two different methods to pair your IMX8 with a potentiostat. Method 1: 1) Make sure that your computer, IMX8 Multiplexer, as well as your potentiostat are turned on. 2) Open the Framework software and choose Experiment > Utilities > Multiplexer Con�gure and Test.