Important Safety Instructions - DeWalt DW624 Instruction Manual

328521-01/DW624 9/6/01 8:00 AM
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS, OR ANY D WALT TOOL, CALL US TOLL FREE AT 1-
E
8 0 0 - 4 - D WALT (1-800-433-9258).
E

Important Safety Instructions

W A R N I N G : When using Electric Tools, basic safety precautions
should always be followed to reduce the risk of fire, electric shock,
and personal injury, including the following:
W A R N I N G : Use of this tool can generate dust containing
chemicals known to cause cancer, birth defects or other
reproductive harm. Use appropriate respiratory protection.
C A U T I O N : Some wood contains preservatives such as copper
chromium arsenate (CCA) which can be toxic. When cutting these
materials extra care should be taken to avoid inhalation and mini -
mize skin contact.
READ ALL INSTRUCTIONS.
• KEEP WORK AREA CLEAN. Cluttered areas and benches
invite injuries
• CONSIDER WORK AREA ENVIRONMENT. Don't expose
power tools to rain. Don't use power tools in damp or wet
locations. Keep work area well lit.
• GUARD AGAINST ELECTRIC SHOCK. Prevent body contact
with grounded surfaces. For example: pipes, radiators, ranges,
refrigerator enclosures.
• KEEP CHILDREN AWAY. All visitors should be kept away
from work area. Do not let visitors contact tool or extension
c o r d .
• STORE IDLE TOOLS. When not in use, tools should be
stored in dry, and high or locked-up place – out of reach of
c h i l d r e n .
• DON'T FORCE TOOL. It will do the job better and safer at the
rate for which it was intended.
Page 4
• USE RIGHT TOOL. Don't force small tool or attachment to do
the job of a heavy-duty tool. Don't use tool for purpose not
intended, for example, don't use circular saw for cutting tree
limbs or logs.
• DRESS PROPERLY. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Non-skid footwear is
recommended when working outdoors. Wear protective hair
covering to contain long hair.
• USE SAFETY GLASSES. Also use face or dustmask if
operation is dusty.
• DON'T ABUSE CORD. Never carry tool by cord or yank it to
disconnect from receptacle. Keep cord from heat, oil, and
sharp edges.
• SECURE WORK. Use clamps or a vise to hold work. It's safer
than using your hand and it frees both hands to operate tool.
• DON'T OVERREACH. Keep proper footing and balance at all
t i m e s .
• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean
for better and safe performance. Follow instructions for
lubricating and changing accessories. Inspect tool cords
periodically and if damaged have repaired by DeWalt certified
service center. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean, and free from oil
and grease.*
• DISCONNECT TOOLS. When not in use, before servicing,
and when changing accessories.
• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit
of checking to see that keys and adjusting wrenches are
removed from tool before turning it on.
• AVOID UNINTENTIONAL STARTING. Don't carry plugged-in
tool with finger on switch. Be sure switch is off when plugging
i n .
• EXTENSION CORDS. Make sure your extension cord is in
good condition. When using an extension cord, be sure to use