Canon imageFORMULA RS40 User Manual page 23

3
To check the scanned image, click the [Finish] button.
Hint
If [Edit after scanning] is disabled in the One Touch button settings,
the edit window will not be displayed.
Click the button to edit the output settings.
Click the [Cancel] button to discard the scanned image and return to
the main window.
When the output has finished, a popup window will be displayed. If
saving the scanned image, a link to open the save destination folder
will be displayed.
Hint
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] link may not be displayed.
23