Overview; Device Function Do200_Nb-Iot Parking Occupation Sensor's; How To Install Nb-Iot Sim Card - CNDINGTEK DO200 Configuration Manual

1 Overview

These documents are helpful to understand the DO200 Parking Occupation Sensor's
following:
▪Function of Device
▪How to install SIM card?
▪Protocol and API
▪Hardware Interface(debug/configure interface and battery interface )
▪Modify equipment parameters ( upload interval and APN,IP ....)
▪FAQ
2 Device Function DO200_NB-IoT Parking Occupation
Sensor's
Function:The device can detect if the parking space is occupied. When the vehicle is
detected to enter or leave, the sensor will be triggered to report the data.
When the device is restarted and the device is restarted, the sensor will learn the
surrounding environment, so it is considered to be a car-free state at this time.

3 How to install NB-IoT SIM card?

NB-IoT Sim card:MICRO card,;the frequency band of the SIM card used needs to be
the same as the device frequency band.
Insert NB card: sensor use self-elastic card slot, please find the card slot and insert
the NB card(If you want to change or remove the card, please press the card and it
will pop up automatically.).
Please pay attention to the installation direction of the card, as shown below:
Beijing Dingtek Technology Corp., Ltd.
http://www.dingtek.com
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022
DO200 Parking Occupation Sensor_NB-IoT_V2.1
Tel:86-10-64718863,64753700
E-mail: service@dingtek.com
Page 4