Table of Contents
Advertisement
Figure 6.10
Figure6.11
Notes:
1 After the device enters sleep mode, the sending command is invalid;
2 Before sending command, please click on the enter, and then send;
3 Check whether the RX and TX of the TTL and the device are correctly connected. If
the connection is reversed, no output is displayed on the serial port after the device
Beijing Dingtek Technology Corp., Ltd.
http://www.dingtek.com
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022
DO200 Parking Occupation Sensor_NB-IoT_V2.1
Tel:86-10-64718863,64753700
E-mail: service@dingtek.com
Page 12
Advertisement
Table of Contents
Need help?
Do you have a question about the DO200 and is the answer not in the manual?
Questions and answers