iBot Vac Plus Instruction Manual page 31

Component maintenance / roller brush and side brush
Clean the roller brush
1. Open the roller brush cover assembly
3.Use the cleaning brush to cut off the hair tangled on the roller brush
Clean the side brush
Take off the side brush, mop to clean.
- 60 -
2. Take out the roller brush
Component maintenance / charging pole pieces,
ground sensors, drive wheels and universal wheel
Friendly Reminder:
The interior of the charging pole pieces, the ground sensors and the front bumper all contain
sensitive electronic components. Please use dry mop to clean the above parts and do not use wet
mop to prevent damage caused by water inflow.
Clean the charging pole pieces
Clean the universal wheel
* If you do not use the product for a long time, please fully charge it
before storing. Turn off the host and keep charging power to it every 3 months to
prevent the battery from over discharge.
* If the battery is over discharged or is not used for a long time,
the product may not be able to be charged. Please contact our company for after-
sales maintenance. Do not disassemble it by yourself.
* The picture is for reference only, the actual item is the standard.
Clean the ground sensors
Clean the drive wheels
- 61 -