Advertisement
Available languages
Available languages
Product usage / Preparation
Smart Water Tank™
- Do not use the floor mopping function on carpets.
- After mopping the floor, please clean up the remaining water in time remove the mop and cleaning the mop
- Do not use detergents. Pour only clean water into the container..
1、Add Water：Open the water inlet to water
2、Install the Mop：Close water inlet cover stick the mop
3、Install the water tank assembly
4、Start mopping the floor
To control the speed of water supply to the napkin, use the button on
use the mobile application.
One, two or three clicks correspond to a weak, medium or most intense humidification rate.
Adjust the optimum mode for your floor.
- 52 -
the remote control or
Product Use / Host Charging
1、Placing and charging: The charging station is against the wall and placed on a flat
ground. Do not place articles within the range of 0.5m left and right and 1.5m
ahead.
2、Connect the power supply.
3、Installing side brush: Install the side brush according to the left and right (L/R).
- 53 -
Advertisement
