Instructions For Use - UWANT X100 Instruction Manual

Instructions for Use

Preparation
1. Before use, please check the battery status of your cleaner. If the power is
insufficient, please charge it in time (refer to the charging guide for details),
and use it after fully charged.
2. The default is the standard mode when the machine is turned on. You can
select the appropriate mode as needed.
Battery status
Add water to clean water tank
1. Press the clean water tank button to remove the tank (Fig. 1)
2. Open the cover of the tank and pour clean water (below 60°C) to the water
level. If deep cleaning is required, pour 20ml UWANT deep cleansing fluid (ratio
1:30) in a measuring cup (Fig. 2)
3. Close the cover of the tank tightly (Fig. 3)
4. Install the clean water tank back to the body until there is a click sound (Fig. 4)
①
③
08
How to Use／Instructions for Use
Standard Dry suction
mode mode
Mode display area
Smart mode
water
level
②
④