Table of Contents
Advertisement
Introduction for buttons on remote controller
9
TEMP:
Press this button, you can see indoor set temperature, indoor ambient temperature
on indoor unit's display. The setting on remote controller is selected circularly as below:
When selecting "
unit displays set temperature; When selecting
indicator on indoor unit displays indoor ambient temperature;
receives other remote control signal that will return to display the setting temperature.
Caution:
●
This model hasn't outdoor ambient temperature display function. While remote controller
can operate
●
It's defaulted to display set temperature when turning on the unit.
●
Only for the models with temperature indicator on indoor unit.
QUIET:
10
Press this button, the Quiet status is under the Auto Quiet mode (display "
and Quiet mode (display "
displayed),after powered on, the Quiet OFF is defaulted. Note: the Quiet function cannot
be set up in Fan and Dry mode;Under the Quiet mode (Display "
mode) the fan speed is not available.
CLOCK:
11
Press CLOCK button, blinking
present time.Holding down either button above 2 seconds increases or decreases the
time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During
blinking after setting, press CLOCK button again to confirm the setting,and then
will be constantly displayed.
T-ON/T-OFF
12
Press T-ON button to initiate the auto-ON timer. To cancel the auto-timer program, simply
press this button again.
A
t f
r e
p
e r
s s
f o
setting. Within 5 seconds, press + or - button to adjust the time value. Every press of either
button changes the time setting by 1 minute. Holding down either button rapidly changes the
time setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press TIMER
ON button to confirm.
Press T-OFF button to initiate the auto-off timer. To cancel the auto-timer program, simply
press the button again.TIMER OFF setting is the same as TIMER ON.
TURBO:
13
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in the shortest time. In COOL mode, the unit will blow strong
cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air
at super high fan speed.
LIGHT:
14
Press LIGHT button to turn on the display's light and press this button again to turn off
the display 's light. If the light is turned on ,
disappears.
" with remote controller or no display, temperature indicator on indoor
"
"
and indoor unit displays set temperature.
" singal) and Quiet OFF (there is no signal of "
:
h t
s i
b
t u
o t
, n
d
s i
a
p
no display
"
" with remote controller, temperature
. Within 5 seconds,pressing +or - button adjusts the
p
e
a
s r
a
n
d
"
O
N
b "
n i l
k
is displayed. If the light is turned off,
6
3s later or within 3s it
Auto
" Under the Quiet
. s
00:00 is displayed for ON time
"signal )
"
Advertisement
Table of Contents
