HIKVISION HWT-B123-M User Manual page 8

Figure 2-6 Disassemble the Camera
2. Paste the drill template (supplied) to the place
where you want to install the camera.
3. Drill the screw holes and the cable hole (optional)
on the ceiling according to the drill template.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable
4. Attach the mounting base to the ceiling, and secure
them with supplied screws.
Figure 2-8 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains

self-tapping screws, and expansion bolts.
For cement ceiling, expansion bolts are required

to fix the camera. For wooden ceiling,
self-tapping screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Combine the camera body with the mounting base.
1). Pull out the clip plate.
2). Put the camera body in the mounting base.
3). Push in the clip plate.
4). Tighten the screw to secure the camera on the
mounting base.
Figure 2-9 Secure the Camera with Mounting Base
7. Connect the corresponding cables, such as power
cord, and video cable.
Figure 2-7 Drill Template
.