Table of Contents
Advertisement
Errors
lights up.
flashes.
All other error codes.
Malfunctions
Errors
The appliance is not work-
ing.
The programme does not
start.
Cause
The filters in the water inflow
are blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Ini-
cioº/ Pausa + Carga.
Door is not closed.
Childproof lock is activated.
Troubleshooting en
Troubleshooting
Clean the filters in the water inflow
▶
→ Page 39.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 33
Start the
programme.
▶
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Inicioº/ Pausa + Carga to
4.
start the programme.
Close the door.
1.
Press Inicioº/ Pausa + Carga to
2.
start the programme.
Call the after-sales service.
▶
→ "Customer Service", Page 51
Troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press Inicioº/ Pausa + Carga.
▶
Close the door.
1.
Press Inicioº/ Pausa + Carga to
2.
start the programme.
→ "Deactivating the childproof
▶
lock", Page 34
43
Advertisement
Table of Contents
