Table of Contents
Advertisement
en Cleaning and servicing
To allow the detergent solution to
6.
flow out into the container, remove
the pump cap carefully.
Cleaning the drain pump
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Requirement: The drain pump is
empty. → Page 37
Clean the inside and the thread on
1.
the pump cap and pump housing.
38
Make sure that the impeller in the
2.
drain pump can be turned.
Insert the pump cap and screw it
3.
on.
90°
The handle on the pump cap must
be in a vertical position.
Insert the maintenance flap and
4.
lock it into place.
Close the maintenance flap.
5.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the
after you have emptied the drain
pump.
Turn on the tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Start the
programme.
5.
2
1
1
programme
Advertisement
Table of Contents
