Subscribe to Our Youtube Channel
Related Manuals for UNITED UHC-838
Summary of Contents for UNITED UHC-838
- Page 1 CONVECTOR HEATER USER INSTRUCTIONS Model: UHC-838 IMPORTANT Read these instructions fully before using the heater. Retain these instructions for future reference.
- Page 2 ASSEMBLY OF THE HEATER Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. These are to be attached to the base of the heater using the 4 screws provided, taking care to ensure that they are located correctly in the bottom ends of the heater side moldings SAFETY INSTRUCTIONS (to be read before operating the heater)
- Page 3 Main heater operation Choose a suitable location for the heater, taking into account the safety instructions above. Insert the plug of the heater into a suitable socket. Turn THERMOSTAT KNOB fully in a clockwise direction to the maximum setting. Turn on the heating elements by means of HEATER SWITCHES on the side panel.
- Page 4 automatically. The service lamp then goes out. − If the device switches itself off, disconnect the mains plug from the socket. The heater is ready for service again after a short cooling-off phase (approx.15 minutes). Plug the mains plug back into the socket.
- Page 5 EN 60335-1:12+A11:14 EN 62233:08 EN 62321:09, IEC 62321-4:13, IEC 62321-5:13, IEC 62321-6:15, IEC 62321-7-1:15 EXCLUSIVE IMPORTER IN GREECE: Amiridis – Savidis S.A. 87A, 17th November Str - P.C. 55534 Pylaia - Thessaloniki - Greece T: 2310944944 | F: 2310944940 www.amiridis-savvidis.gr www.united-electronics.gr...
Need help?
Do you have a question about the UHC-838 and is the answer not in the manual?
Questions and answers